OUR SERVICES
Quality Services in New York
Specialty Powdercoating and sandblasting
Best Finish in The Industry.
Fast Turnover.
What We Do
Powder Coating Republic was established by our parent company, New York CMI, to produce the high-end finishes necessary for the luxury interior design industry. We have perfected our internal powder coating operation to consistently execute exceptional finishes on any job.
01
Pre-treatment and Sandblasting
Sandblasting, or otherwise known as abrasive blasting, is a pre-treatment activity where abrasive sand, bead or shot particles are blasted directly at a surface at high velocity.
02
Metallizing
Zinc spraying, or metallizing, is accomplished by feeding zinc wire or powder into a heated gun, where it is melted and sprayed onto the part using combustion gases and/or auxiliary compressed air to provide the necessary velocity.
03
Powder Coating
The process of powder coating is often faster than using conventional paint. In the powder coating process, a thick coating layer is applied to the part and due to the heating process this technique makes your parts much more durable.
Pre-Treatment And Sandblasting
We are New York-s leading sand blasting service with a strong focus on customer service, high-quality finishes, and prompt lead times. Our sandblasting facilities and equipment are the best in the industry, providing our customers with the best finish.
Metallizing
The metallized zinc coating is rough and slightly porous, with density about 80% that of hot-dip galvanizing. As the metallized coating is exposed to the atmosphere, zinc corrosion products tend to fill the pores providing consistent cathodic protection. The mechanically-bonded, pure zinc coating covers welds, seams, ends and rivets well and can be applied in excess of 10 mils (254 µm). Coating consistency is dependent on operator experience and coating variation is always a possibility. Coatings tend to bethinner on corners and edges and no coating is applied to interior surfaces or difficult to access recesses and cavities.
Powder Coating
Powder Coating is a method of applying a layer of electrostatic-charged dry coloured powder to a metal surface which is then cured with heat to form a durable hard finish.